Our wooden watches have chronograph functions. They come in two styles:
The first type, the three small eyes on the dial of the wooden watch, are distributed on the left side of the dial. What do these three little eyes mean?
Each time the uppermost small pointer rotates, it means that the time has passed 2 seconds, and each time the lowermost small pointer rotates, it means that the time has passed 1 minute. a circle. The small hand on the far left rotates once to represent one hour.
How to use the functions of this chronograph? Four steps for you to learn quickly.
1), first make sure that all hands are pointing to the initial position in the middle of the top, and the crown is not pulled out.
2), press the first button on the top right of the watch, you can find that the small hands on the top start to rotate rapidly, and the small hands on the bottom also start to move in rhythm. With the passage of a long time, you can find that the small pointer on the left has also changed its position. So this button has the function of "starting" the chronograph;
3) When the small hands are running, if you press the top button on the watch's right side again, all the small hands will stop moving. Press it again and the small pointer continues to move. So this button also has the function of "pause" the chronograph.
4) When you finish counting the seconds and want to restore the initial positions of all the small hands, press the bottom button on the far right of the watch, and you can do it. So this button has the function of "reset".
Through the above four steps, you have mastered how to use one of the chronograph functions of our wooden watch. Here is the second explanation:
The second type, the three small eyes on the dial of the wooden watch are distributed under the dial. The meanings of the three little eyes are:
Each movement of the small middle pointer represents 1 second, each movement of the rightmost pointer represents 1 minute, and each movement of the leftmost pointer represents 1 hour.
It is used in the same way as the first chronograph. The same two buttons control the functions of "Start", "Pause" and "Reset".
Also, you should have another question. As mentioned before, make sure that all the small hands point to the top middle initial position before starting to use the chronograph function. What if they didn't? How to adjust. The following also tells you how to do it.
1), pull out the crown to the outermost position, as shown in "position 2" as shown below;
2) For the three small eyes located on the left side of the dial, long-press the top first button on the right side of the watch to adjust the position of the top small pointer and adjust it to point to the top middle position; long-press the right side of the watch The bottom button can adjust the position of the bottom pointer and adjust it to point to the top middle position. During this process, the position of the leftmost pointer will also change. Continue to press and hold the bottom button on the right side of the watch to point to the top middle position.
3) For the three small eyes located on the lower side of the dial, just press and hold the bottom button on the right side of the watch to make all the small hands move to the top middle position.
4) After the adjustment is completed, push the crown back to the original position. When the watch is running normally, all the small hands of the chronograph are reset at this time.
I hope this article can help you use our multifunctional wooden watch, if you have more questions, please feel free to contact us and leave us a message.
